A new sustainable filtration membrane extraction method based on nanoconfined liquid phase extraction: Determination of organochlorinated pesticides and pyrethroids in tea samples.

BACKGROUND: Pesticides are used in agricultural production for prevent and control crop diseases and pests, but it is easy to cause excessive pesticides residues in agricultural products, polluting the environment and endangering human health. Due to their unmatched and sustainable capabilities, nanoextraction procedures are becoming every day more important in Analytical Chemistry. In particular, nanoconfined liquid phase extraction has shown extraction capabilities toward polar, medium polar, and/or nonpolar substances, which can be easily modulated depending on the nanoconfined solvent used. Furthermore, this "green" technique showed excellent characteristics in terms of recoveries, extraction time (≤1 min), reliability, and versatility. (97) RESULTS: In this work, the advantages of this technique have been coupled with those of filtration membrane extraction, making use of carbon nanofibers (CnFs) growth on carbon microspheres (CµS). This substrate has been deposited on a filter, which combined with gas chromatographic mass spectrometry (GC-MS) analysis successfully employed for the nanoextraction of 30 pesticides (18 organochlorine and 12 pyrethroids) in tea samples. Under the optimized extraction conditions, the linear range with standard solutions was from 1 to 1000 ng mL-1 (R2 ≥ 0.99), the limit of detections in tea samples were in the range 0.56-17.98 µg kg-1. The accuracy of the developed method was evaluated by measuring the extraction recovery of the spiked tea samples, and recoveries between 74.41 % and 115.46 %. (119) SIGNIFICANCE: Considering the versatility of nanoconfined liquid phase extraction and the functionality of the filtration membrane extraction procedure, this new extraction method can be considered a powerful candidate for automatized high-throughput analyses of real samples. (34).

Removal of multiple pesticides from water by different types of membranes.

Pesticides are used in agriculture to protect crops from pathogens, insects, fungi and weeds, but the release of pesticides into surface/groundwater by agriculture runoff and rain has raised serious concerns not only for the environment but also for human health. This study aimed to investigate the impact of surface properties on the performance of seven distinct membrane types utilized in nanofiltration (NF), reverse osmosis (RO) and forward osmosis (FO) processes in eliminating multiple pesticides from spiked water. Out of the membranes tested, two are self-fabricated RO membranes while the rest are commercially available membranes. Our results revealed that the self-fabricated RO membranes performed better than other commercial membranes (e.g., SW30XLE, NF270, Duracid and FO) in rejecting the targeted pesticides by achieving at least 99% rejections regardless of the size of pesticides and their log Kow value. Despite the marginally lower water flux exhibited by the self-fabricated membrane compared to the commercial BW30 membrane, its exceptional ability to reject both mono- and divalent salts renders it more apt for treating water sources containing not only pesticides but also various dissolved ions. The enhanced performance of the self-fabricated RO membrane is mainly attributed to the presence of a hydrophilic interlayer (between the polyamide layer and substrate) and the incorporation of hydrophilic nanosheets in tuning its surface characteristics. The findings of the work provide insight into the importance of membrane surface modification for the application of not only the desalination process but also for the removal of contaminants of emerging concern.

A novel honeycomb-like 3D-printed device for rotating-disk sorptive extraction of organochlorine and organophosphorus pesticides from environmental water samples.

In this study, 3D-printing based on fused-deposition modeling (FDM) was employed as simple and cost-effective strategy to fabricate a novel format of rotating-disk sorptive devices. As proof-of-concept, twenty organochlorine and organophosphorus pesticides were determined in water samples through rotating-disk sorptive extraction (RDSE) using honeycomb-like 3D-printed disks followed by gas chromatography coupled to mass spectrometry (GC-MS). The devices that exhibited the best performance were comprised of polyamide + 15 % carbon fiber (PA + 15 % C) with the morphology being evaluated through X-ray microtomography. The optimized extraction conditions consisted of 120 min of extraction using 20 mL of sample at stirring speed of 1100 rpm. Additionally, liquid desorption using 800 µL of acetonitrile for 25 min at stirring speed of 1100 rpm provided the best response. Importantly, the methodology also exhibited high throughput since an extraction/desorption platform that permitted up to fifteen simultaneous extractions was employed. The method was validated, providing coefficients of determination higher than 0.9706 for all analytes; limits of detection (LODs) and limits of quantification (LOQs) ranged from 0.15 to 3.03 µg L-1 and from 0.5 to 10.0 µg L-1, respectively. Intraday precision ranged from 4.01 to 18.73 %, and interday precision varied from 4.83 to 20.00 %. Accuracy was examined through relative recoveries and ranged from 73.29 to 121.51 %. This method was successfully applied to analyze nine groundwater samples from monitoring wells of gas stations in São Paulo. Moreover, the greenness was assessed through AGREEprep metrics, and an overall score of 0.69 was obtained indicating that the method proposed can be considered sustainable.

Determination of Pesticides in Soybean Seeds Incorrectly Discarded Near a Spring of the Paranaíba River, GO-Brazil.

The objective of this research was to evaluate the contamination of pesticides of carbamate and benzimidazole classes in soil, water and soybean seeds, incorrectly discarded near a spring in the state of Goiás-Brazil. The Solid-Liquid and Liquid-Liquid Extraction with Low Temperature Partition (SLE/LTP or LLE/LTP) methods were used for pesticide extraction and the analyses were performed by HPLC-UV. A high resolution mass spectrometer was used to confirm the identity of the compounds present in the seeds. The results showed that the soybeans were treated with the pesticide carbendazim and the dosage was three times higher than established by Brazilian legislation. In the soil and water analyzed there was no presence of the pesticides researched, nor of the carbendazim detected in the seeds. Since this was an environmental crime due to incorrect disposal, it is not known how long ago it occurred. Thus, depending on how long the seeds had been exposed there, the pesticide could have leached out, and caused contamination in the spring and soil. Thus, we conclude that the incorrect disposal of seeds treated with pesticides can be a risk to the permanence of life on the site.

Synthesis of metal-organic framework @molecularly imprinted polymer adsorbents for solid phase extraction of organophosphorus pesticides from agricultural products.

The novel core-shell structural zeolitic imidazolate framework-8 @molecularly imprinted polymers were successfully synthesized by surface imprinting technique and used as adsorbents for solid-phase extraction of organophosphorus pesticides. The obtained hybrid composites were characterized by scanning electron microscopy, transmission electron microscopy and Fourier-transform infrared, and their adsorbing and recognition performance were evaluated by binding experiments. The results showed that zeolitic imidazolate framework-8 @molecularly imprinted polymers presented a typically core-shell structure with molecularly imprinted shell (about 50 nm) homogeneously polymerized on the surface of zeolitic imidazolate framework-8 core, and exhibited specific recognition towards organophosphorus pesticides with fast adsorption capacity. The adsorption and desorption conditions including sample loading solvent, sample pH, washing and elution solvent were optimized. Under optimum conditions, the solid-phase extraction based on zeolitic imidazolate framework-8 @molecularly imprinted polymers combined with high liquid chromatography-tandem mass spectrometry method for determining organophosphorus pesticides was established and exhibited good linearity (R2 ≥ 0.9927) in the range of 1-200 µg/L. With spiked at three different concentration levels in agricultural products (cauliflower, radish, pear, muskmelon), the recoveries ranged from 82.5% to 123.0% with relative standard deviations lower than 8.24%. The developed method was sensitive, convenient and efficient. More importantly, this study could provide a promising strategy for designing new adsorbents with extremely fast mass transfer rate for other potential trace contaminants.

Method validation for determination of nine pesticides in okra and their mitigation using different solutions.

In this paper we optimized QuEChERS method for extraction of nine pesticides viz. acephate, acetamiprid, chlorpyrifos, cypermethrin, imidacloprid, thiamethoxam, profenofos (insecticides), carbendazim and tebuconazole (fungicides) and performed their quantitative estimation in okra crop by HPLC-UV and GC-ECD. Decontamination treatments namely washing with running tap water, soaking in lukewarm water (50-60°C), soaking in solutions of 1% NaCl, 5% NaHCO3, 2% CH3COOH, 0.01% KMnO4 and three commercial formulations were also done for ten minutes every time, to calculate the extent of pesticide removal from okra. Results revealed that the proposed extraction method was efficient, inexpensive, accurate, rapid and precise and can suitably be used for the simultaneous quantitative determination of the above pesticides. The standard curve was linear over the concentration range of 0.05-5µg g-1 with R2 close to one (0.999). Soaking of okra in 2% acetic acid and then washing proved as the best decontamination treatments for all the pesticides. It showed the highest relative decontaminating capacity in comparison to the other solutions tested. Since the pesticide residues are usually present in higher amount in vegetables being consumed, it is of utmost importance to keep an eye over the use of pesticides to protect the crops.

Chemical safety: Pesticides

Pesticides are used in public health to kill vectors of disease, such as mosquitoes, and in agriculture to kill pests that damage crops

Isolation, characterization and identification of pesticide degrading bacteria from contaminated soil for bioremediation.

In this study, malathion and chlorpyrifos degrading bacteria were isolated from agricultural soil samples taken from the Himachal region in India. A total of 52 organisms were isolated which were further screened for their efficiency for chlorpyrifos and malathion degradation. Screening was done by checking the growth on Nutrient Agar, Mineral Salt Medium and MacConkey agar plates containing chlorpyrifos and malathion; 37 isolates showed growth in these. Biomass assay and minimum inhibitory concentration (MIC) determination were carried out for the selection of most efficient bacterial isolates. Out of the seven isolates which showed good biomass assay and MIC, only three isolates (PDM-2, PDM-15 and PDM-20) were selected for further studies. These were characterized by various biochemical tests, Gram staining, indole test, methyl red test, Voges-Proskauer test, citrate utilization test and carbohydrate fermentation test. Out of three isolates, PDM-15 showed good resistance against the antibiotics such as erythromycin, chloramphenicol, ampicillin and penicillin and identified as Kocuria assamensis. Degradation of 71.3% of chlorpyrifos and 85% of malathion was observed by the gas chromatography. Therefore, the Kocuria assamensis can be used in the bioremediation of pesticide-contaminated soil.

Residual characteristics of etofenprox in the processing stages of rice cakes and cookies.

The changes in residual amounts of an insecticide (etofenprox) in processed rice cakes and cookies were investigated in this study. Test samples were sprayed with etofenprox during rice cultivation, and brown rice samples were dipped in a pesticide solution to investigate the effects of washing and processing. A multiresidue method for multiclass pesticides was employed for etofenprox analysis using a high-performance liquid chromatography-ultraviolet detector setup. Etofenprox was not detected in polished rice that was processed into rice cakes and cookies. The etofenprox residue levels were 2.13 mg/kg in each processing stage of brown rice products that were dipped in 400 mg/kg etofenprox solutions. The residual amounts of etofenprox in washed/polished rice and rice flour obtained by grinding were 1.25 and 0.77 mg/kg, respectively. The residual levels were 0.38 mg/kg in rice cakes prepared by cooking rice flour in a steamer for 20 min (a decrease of 82.1% compared to that in polished rice), 0.47 mg/kg in rice cookies baked in an oven for 20 min (a decrease of 78.0%), and 0.21 mg/kg in fried rice cookies (a decrease of 90.2%). Overall, the residual levels of etofenprox decreased in a range of 40-100% during the processing of rice cakes and cookies.

Chitosan-Graphene Oxide Composite Membranes for Solid-Phase Extraction of Pesticides.

Solid-phase extraction (SPE) coupled to LC/MS/MS analysis is a valid approach for the determination of organic micropollutants (OMPs) in liquid samples. To remove the greatest number of OMPs from environmental matrices, the development of innovative sorbent materials is crucial. Recently, much attention has been paid to inorganic nanosystems such as graphite-derived materials. Graphene oxide has been employed in water-purification processes, including the removal of several micropollutants such as dyes, flame retardants, or pharmaceutical products. Polysaccharides have also been widely used as convenient media for the dispersion of sorbent materials, thanks to their unique properties such as biodegradability, biocompatibility, nontoxicity, and low cost. In this work, chitosan-graphene oxide (CS_GO) composite membranes containing different amounts of GO were prepared and used as sorbents for the SPE of pesticides. To improve their dimensional stability in aqueous medium, the CS_GO membranes were surface crosslinked with glutaraldehyde. The composite systems were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, thermogravimetric analysis, swelling degree, contact angle, and mechanical measurements. As the GO content increased, a decrease in surface homogeneity, an improvement of mechanical properties, and a reduction of thermal stability of the CS-based membranes were observed. The increased dimensional stability in water, together with the presence of high GO amounts, made the prepared composite membranes more efficacious than the ones based just on CS in isolating and preconcentrating different hydrophilic/hydrophobic pollutants.

Application of a fast and sensitive method for the determination of contaminants of emerging concern in wastewater using a quick, easy, cheap, effective, rugged and safe-based extraction and liquid chromatography coupled to mass spectrometry.

The inefficiency of wastewater treatment plants (WWTPs) to remove contaminants of emerging concern (CECs) leads to their continuous release to the environment. Consequently, CECs are present at low concentrations in the treated wastewater (TWW), producing unpredicted and unwanted effects on living organisms as they are discharged into water receiving bodies. This work presents a fast and reliable method for the determination of CECs in TWW based on the innovative application of a QuEChERS (quick, easy, cheap, effective, rugged and safe) method for water extraction and determination by sensitive liquid chromatography coupled to quadrupole-linear ion trap tandem mass spectrometry (LC-QqLIT-MS/MS). The scope of the proposed QuEChERS-based method allows the monitoring of 107 CECs, including pharmaceuticals (58), antibiotics (16) and pesticides (33). The proposed method was successfully validated in urban TWW at two concentration levels (50 and 500 ng L-1) and it is a feasible alternative to conventional and time-consuming solid-phase extraction (SPE) methodologies. 89% of the CECs presented mean recovery values in the 70-120% range with relative standard deviations (RSDs) always < 20% (intra and inter-day precision), and limits of quantification (LOQs) in the range 5-500 ng L-1 (89% of the compounds showed a LOQ ≤ 50 ng L-1). The applicability of the method was demonstrated by the analysis of urban TWW samples (7 sampling events). In total, 35 CECs (23 pharmaceuticals, 2 antibiotics and 10 pesticides) were detected in the monitored samples with concentrations ranging from 5 to 677 ng L-1.

Current Applications of Magnetic Nanomaterials for Extraction of Mycotoxins, Pesticides, and Pharmaceuticals in Food Commodities.

Environmental pollutants, such as mycotoxins, pesticides, and pharmaceuticals, are a group of contaminates that occur naturally, while others are produced from anthropogenic sources. With increased research on the adverse ecological and human health effects of these pollutants, there is an increasing need to regularly monitor their levels in food and the environment in order to ensure food safety and public health. The application of magnetic nanomaterials in the analyses of these pollutants could be promising and offers numerous advantages relative to conventional techniques. Due to their ability for the selective adsorption, and ease of separation as a result of magnetic susceptibility, surface modification, stability, cost-effectiveness, availability, and biodegradability, these unique magnetic nanomaterials exhibit great achievement in the improvement of the extraction of different analytes in food. On the other hand, conventional methods involve longer extraction procedures and utilize large quantities of environmentally unfriendly organic solvents. This review centers its attention on current applications of magnetic nanomaterials and their modifications in the extraction of pollutants in food commodities.

Dispersive Solid-Phase Extraction of Multiresidue Pesticides in Food and Water Samples.

Pesticides has become an essential part of our life and have entered and bioaccumulated in water, air, soil ecosystem, and food. However, the majority of the pesticides are not biodegradable and eco-friendly, and the accumulation of them in food and the ecosystem could constitute a serious risk to human and environmental health. It is critical to understand pesticides' identities and level of residues present in environment and food. Robust analytical techniques that offer easy, fast, and reliable extraction of multiresidue pesticides in water, soil and food with matrix interference-free quantification are necessary for proper risk assessment. Although various methods have been reported for pesticides extraction in food and environment samples, dispersive solid-phase extraction (d-SPE) has become the most popular sample preparation method for pesticides analysis today. Multiresidue pesticides extraction in food and environmental sample using a novel d-SPE method, dispersive pipette extraction (DPX), is described step-by-step in this chapter.

Magnetic molecularly imprinted polymer nanoparticles for the extraction and clean-up of thiamethoxam and thiacloprid in light and dark honey.

In this work, new selective and sensitive dual-template molecularly imprinted polymer nanoparticles (MIPs) were synthesized and characterized. Sorbent MIPs were investigated for simultaneous extraction and clean-up of thiamethoxam and thiacloprid from light and dark honey samples. In this study, ultra-high-performance liquid chromatography-tandem mass spectrometry triple-quadrupole (UHPLC-MS/MS) (QQQ) was used to detect and quantify the pesticides. The kinetic model with adsorption kinetics of sorbent was investigated. The optimal adsorption conditions were 80 mg of polymer MIPs, a 30-min extraction time, and a pH of 7. The detection limit (LOD) and the quantification limit (LOQ) varied from 0.045 to 0.070 µg kg-1 and from 0.07 to 0.10 µg kg-1, respectively. The intra-day and inter-day precision (RSD, %) ranged from 1.3 to 2.0% and from 8.2 to 12.0%, respectively. The recovery of thiamethoxam and thiacloprid ranged from 96.8 to 106.5% and 95.3 to 104.4%, respectively, in light and dark honey samples.

Preparation and evaluation of various banana-based biochars together with ultra-high performance liquid chromatography-tandem mass spectrometry for determination of diverse pesticides in fruiting vegetables.

Biomass, originates from plant- or animal-based materials with a huge potential to be reused. Here we report a simple, rapid and inexpensive method for preparation of modified biochars derived from the banana peel followed by their applications in pipette-tip micro solid-phase extraction (PT-µSPE). Due to the contribution of various effective parameters on modification of banana peel biochars (BPBs), Taguchi design was used to optimize activation temperature, activation repetition, treatment material and impregnation ratio. Efficiency of the prepared BPBs were studied by extraction of twelve various pesticides, as model analytes with an extended range of log P values (1.4-5.7), followed by their determination using ultra-high performance liquid chromatography-tandem mass spectrometry. After finding the most suitable BPB, the affecting parameters on the PT-µSPE performance were optimized. Accordingly, the LOD values of 0.03-10 µg L-1, linear dynamic range of 0.1-200 µg L-1 and a range of RSD values of 5.3-19% were obtained. Eventually, five fruiting vegetables were analyzed and screened for their possible contaminations. Among the tested pesticides, chlorpyrifos, diazinon, malathion, phosalone, propargite and thiophanate-methyl were detected in eggplant, sweet pepper, zucchini and tomato.

Exploring the use of cork pellets in bar adsorptive microextraction for the determination of organochloride pesticides in water samples with gas chromatography/electron capture detection quantification.

In this study, a biosorbent material with characteristics for the adsorption of organic compounds was used for a cork pellet-based bar adsorptive microextraction technique, as a new greener alternative for the determination of organochlorine compounds. Aldrin, chlordane, dieldrin, endrin, lindane, 4,4-DDD, 4,4-DDE, 4,4-DDT, α-endosulfan and ß-endosulfan were analyzed in water samples (drinking water, stream water and river water) with separation/detection by gas chromatography and electron capture detection (GC/ECD). The parameters that can affect the sample preparation efficiency such as desorption solvent and time as well as extraction time and ionic strength were evaluated by multivariate and univariate designs. Cork pellets (10  ×  Ø 3 mm) were used for the extraction of 15 mL of sample in the optimal conditions: 60 min of agitation with no salt added to the sample, followed by desorption of the cork pellet with 120 µL of ethyl acetate for 30 min. The bar-to-bar RSD out with five different bars showed good results with RSD ≤ 15.6%, allowing the use of simultaneous extractions. LOD and LOQ values ranged from 3 to 15 ng L-1 and 10 to 50 ng L-1 respectively, and the determination coefficients were greater than 0.9869. The target analytes were not detected in the three analyzed samples. Therefore, the recovery study was performed fortifying the water samples. Analyte recovery ranged from 48.7 - 138.2% for drinking water, 40.2 - 128.2% for stream water and 67.5 - 128.7% for river water.

Poly(ß-cyclodextrin)-Activated Carbon Gel Composites for Removal of Pesticides from Water.

Pesticides are widely used in agriculture to increase and protect crop production. A substantial percentage of the active substances applied is retained in the soil or flows into water courses, constituting a very relevant environmental problem. There are several methods for the removal of pesticides from soils and water; however, their efficiency is still a challenge. An alternative to current methods relies on the use of effective adsorbents in removing pesticides which are, simultaneously, capable of releasing pesticides into the soil when needed. This reduces costs related to their application and waste treatments and, thus, overall environmental costs. In this paper, we describe the synthesis and preparation of activated carbon-containing poly(ß-cyclodextrin) composites. The composites were characterized by different techniques and their ability to absorb pesticides was assessed by using two active substances: cymoxanil and imidacloprid. Composites with 5 and 10 wt% of activated carbon showed very good stability, high removal efficiencies (>75%) and pesticide sorption capacity up to ca. 50 mg g-1. The effect of additives (NaCl and urea) was also evaluated. The composites were able to release around 30% of the initial sorbed amount of pesticide without losing the capacity to keep the maximum removal efficiency in sorption/desorption cycles.

Chiral Recognition for Chromatography and Membrane-Based Separations: Recent Developments and Future Prospects.

With the rapid development of global industry and increasingly frequent product circulation, the separation and detection of chiral drugs/pesticides are becoming increasingly important. The chiral nature of substances can result in harm to the human body, and the selective endocrine-disrupting effect of drug enantiomers is caused by differential enantiospecific binding to receptors. This review is devoted to the specific recognition and resolution of chiral molecules by chromatography and membrane-based enantioseparation techniques. Chromatographic enantiomer separations with chiral stationary phase (CSP)-based columns and membrane-based enantiomer filtration are detailed. In addition, the unique properties of these chiral resolution methods have been summarized for practical applications in the chemistry, environment, biology, medicine, and food industries. We further discussed the recognition mechanism in analytical enantioseparations and analyzed recent developments and future prospects of chromatographic and membrane-based enantioseparations.

Pesticides and their metabolites in human urine: development of multi-analyte method by LC-MS/MS and GC-MS/MS.

The objective of this study consists of being able to develop a precise, reliable, easy, cheap and quick method to identify and quantify the presence of pesticide metabolites and their parents in human urine. In order to reach our purpose we selected the pesticides and their metabolites with intended uses on permanent crops such as orchards and vineyard. The activity planning started with the identification of the target list carried out by UHPLC-MS/MS and GC-MS/MS, succeeded by several tests oriented to determine the best sample treatment having recourse to instrumental analysis in the range 5-100 ng/mL. Several purifications were also investigated combining different adsorbents (PSA, EMR-lipid and final polish pouch). The use of formic acid during the extraction step has no impact on the recoveries, whereas the PSA adsorbent in the cleanup step negatively affects the results for all investigated metabolites. Any substantial differences were not observed in urine matrix for parent compounds achieving recoveries higher than 80% and RSD less than 20%. The final polish in combination or not with Enhanced Matrix Removal EMR-lipid did not show statistically significant difference in term of trueness and precision for both metabolites and parents, as evaluated by one-way ANOVA. The 3-OH THPI was the most critical compound with not acceptable results for linearity, trueness and precision.

Effects of electrolyzed water treatment on pesticide removal and texture quality in fresh-cut cabbage, broccoli, and color pepper.

The effects of alkaline and acidic electrolyzed water (AlEW, AcEW) treatment on the removal of pesticides (phorate, chlorpyrifos, lambda-cyhalothrin, cyfluthrin, procymidone, and chlorothalonil) and texture quality of fresh-cut cabbage, broccoli, and color pepper were investigated. AlEW efficiently removed pesticides from color pepper, whereas AcEW was the optimal treatment for pesticide removal from cabbage and broccoli. AcEW resulted in greater losses of pyrethroid and organophosphates than fungicides, while AlEW was superior for removing fungicides. The best pesticide removal from cabbage (72.28%-91.04%) was achieved by continuous oscillation treatment, while intermittent oscillation for 20 min achieved optimal results for broccoli and color pepper (72.28%-90.11% and 72.24%-88.12%, respectively). No significant deterioration in texture was detected in samples treated with electrolyzed water for 5-25 min. The results suggest that electrolyzed water treatment is effective for removing organophosphate, pyrethroid, and fungicide residues from fresh-cut vegetables while not negatively affecting their texture quality.